Table of Contents
Advertisement
I/O Devices
•
Serial (COM) Port
•
SATA 3.0 (6Gb/s)
•
Video (VGA) Port
Peripheral Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB0/USB1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB6/USB7)
•
Two (2) front accessible USB 2.0 headers with two (2) USB connections each (USB 2/3, USB 4/5)
•
One (1) front accessible USB 3.0 header with two (2) USB connections (USB 8/9)
•
One (1) USB 3.0 Type-A header (USB10)
BIOS
•
256Mb AMI BIOS
SPI Flash UEFI BIOS
®
•
ACPI 6.2, Plug and Play (PnP), SPI dual speed support, and SMBIOS 3.0 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Power supply monitoring
System Health Monitoring
•
Onboard voltage monitoring for 12V, 5VCC, 3.3VCC, VBAT, VCPU, VDIMMAB, VDIMMCD, VCC_SA, 5VSB, 3.3VSB,
VCC_IO, 1.2V_BMC, 1.0V_PCH, CPU temperature, PCH temperature, System temperature, and DIMM temperature
•
5 CPU switch phase voltage regulator
•
CPU thermal trip support
•
Platform Environment Control Interface (PECI)
Fan Control
•
Fan status monitoring via IPMI connections
•
Two cooling zones
•
Low-noise fan speed control
•
Seven (7) 4-pin fan headers
System Management
•
Trusted Platform Module (TPM) support
•
SuperDoctor® 5
•
Redundant power supply unit detection sensor
•
Chassis intrusion header and detection
•
Intel Management Engine
Note: The table above is continued on the next page.
Motherboard Features
•
One (1) serial port on the rear I/O panel (COM1)
•
One (1) front accessible serial port header (COM2)
Eight (8) SATA 3.0 ports:
•
Six (6) SATA 3.0 ports via AHCI controller with RAID 0, 1, 5, 10 (I-SATA2~7)
•
Two (2) SATA 3.0 ports with SATA DOM power (I-SATA0, I-SATA1)
•
One (1) VGA connection on the rear I/O panel
15
Chapter 1: Introduction
Advertisement
Table of Contents
