Table of Contents
Advertisement
VMD Config for PStack2
Intel VMD for Volume Management Device for PStack2
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the feature above is set to Enable, the following features will become avail-
able for configuration:
CPU SLOT4 PCI-E 3.0 x 8(IN x 16) VMD / CPU SLOT3 PCI-E 3.0 x 8 VMD
(Available when the device is detected by the system)
Select Enable to use the Intel Volume Management Device Technology for this spe-
cific root port. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable hot plug support for PCIe root ports 3A~3D. The options
are Disable and Enable.
PCI-E Completion Timeout Disable
Use this feature to enable PCI-E Completion Timeout support for electric tuning. The
options are Yes, No, and Per-Port.
South Bridge
The following USB information will display:
•
USB Module Version
•
USB Devices
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled, Disabled,
and Auto.
XHCI Hand-off
When this feature is disabled, the motherboard will not support USB 3.0. The options are
Enabled and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which will provide complete legacy
USB keyboard support for the operating systems that do not support legacy USB devices.
The options are Disabled and Enabled.
79
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
