Table of Contents
Advertisement
Super X11SRL-F User's Manual
Patrol Scrub
Patrol Scrub is a process that allows the CPU to correct correctable memory errors
detected on a memory module and send the correction to the requestor (the original
source). When this feature is set to Enable, the IO hub will read and write back one
cache line every 16K cycles if there is no delay caused by internal processing. By us-
ing this method, roughly 64 GB of memory behind the IO hub will be scrubbed every
day. The options are Disable and Enable.
Patrol Scrub Interval
This feature allows the user to decide how many hours the system should wait before
the next complete patrol scrub is performed. Use the keyboard to enter a value from
0-24. The default setting is 24.
Patrol Scrub Address Mode
Use this feature to select the Patrol Scrub Address mode. The options are Reverse
Address and System Physical Address.
IIO Configuration
EV DFX Features
When this feature is set to Enable, the EV_DFX Lock Bits that are located on a proces-
sor will always remain clear during electric tuning. The options are Disable and Enable.
Isoc Mode
Isochronous (Isoc) mode allows time-sensitive processes to be given priority. The options
are Disable, Enable, and Auto.
CPU1 Configuration
IOU0 (II0 PCIe Br1) / IOU1 (II0 PCIe Br2) / IOU2 (II0 PCIe Br3)
This feature configures the PCI-E port Bifuraction setting for a PCI-E port specified by
the user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOAT Configuration
Disable TPH
Transparent Huge Pages (TPH) is a Linux memory management system that enables
communication in larger blocks (pages). Enabling this feature will increase perfor-
mance. The options are No and Yes.
76
Advertisement
Table of Contents
