Dimm Installation; Dimm Removal - Supermicro X11SRL-F User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
page 29.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
BMC
LEDBMC
MH11
1
MH1
SP1
JD1
BT1
JI2C_FP1
1
USB 2/3
USB 4/5
M.2-P
LEDSSD1
JBT1
USB 8/9(3.0)
IPMI CODE
BIOS
MAC CODE
LICENSE
BAR CODE
PCH
FANB
JL1
I-SATA1 I-SATA0
Release Tabs
Insert the DIMM module into the memory slot.
31
Chapter 2: Installation
VGA COM1
LEDUID
JUIDB1
LAN USB 6/7(3.0)
LAN
CTRL
LAN1
CTRL LAN2
IPMI_LAN
USB 0/1
OPEN 1st
CPU
CLOSE 1st
JF1
USB 10(3.0)
JRK1
1
JTPM1
FANA FAN2 FAN1
Notches
FAN5