Supermicro X11SRL-F User Manual page 40

Super X11SRL-F User's Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin definitions.
HDD LED/UID Switch
The HDD LED/UID Switch connection is located on pins 13 and 14 of JF1. Attach a cable
to pin 14 to show hard drive activity status. Attach a cable to pin 13 to use the UID switch.
PWR
Power Button
Reset
Reset Button
3.3V
UID LED
3.3V LAN
3.3V LAN
UID SW
3.3V
NMI
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
9, 11 3.3V LAN
10 NIC2 Activity LED
12 NIC1 Activity LED
HDD LED/UID Switch
Pin Definitions (JF1)
Pin# Definition
13 3.3V Stdby/UID SW
14 HDD Active
1 2
Ground
Ground
Power Fail LED
OH/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
3
HDD LED
PWR LED
Ground
19 20
40
1. NIC2 LED
2. NIC1 LED
3. HDD LED/UID Switch
1
2