Kioti LK30 Manual page 66

5
- LK30 / LK35

1. The tractor has two P.T.O speeds
position.
2. P.T.O shifting needs clutch opera-
tion. Press the clutch pedal down
completely to stop the tractor move-
ment and any P.T.O driven equip-
ment movement before shifting the
P.T.O gear shift lever.
LK35-AU-05.indd 26
IMPORTANT
. to. avoid. shock. loads. to. the.

P.t.o,. reduce. engine. speed.
when.engaging.the.P.t.o,.then.
open.the.throttle.to.the.recom-
mended.speed:
to.avoid.damage.of.transmis-

sion,.before.shifting.the.P.t.o.
gear. shift. lever,. fully. disen-
gage.the.main.clutch.
note
. There is a P.T.O-1 (540 rpm) indi-

cator marked on the tachometer
dial.
P.t.o.SHaFt.Cover.anD.SHaFt.CaP
(1) P.T.O Shaft Cover
(2) P.T.O Shaft Cap
You should keep the P.T.O cover in
place at all times and remember to
replace the cap when the P.T.O shaft
is not in use.
S41O538B
2010-01-20 오후 3:12:53