Kioti LK30 Manual page 105

ADjUSTINg FAN BELT TENSION
(1) Bolt
(A) Check the Belt Tension
(B) To Tighten
CAUTION
To avoid personal injury:
Be sure to stop the engine

before checking belt tension.
a deflection of between 7
Proper
~ 9 mm (0.28 ~ 0.34 in.)
fan belt
when the belt is pressed
tension
in the middle of the span.
LK35-AU-10.indd 19
1. Stop the engine and remove the
key.
2. Apply moderate thumb pressure to
belt between pulleys.
3. If tension is incorrect, loosen the al-
ternator mounting bolts and, using a
lever placed between the alternator
and the engine block, pull the alter-
nator out until the deflection of the
belts falls within acceptable limits.
S41Oa28a
4. Replace fan belt if it is damaged.
PERIODIC SERVICE PERIODIC SERVICE
EVERY 200 HOURS
REPLACINg ENgINE OIL FILTER
See "Initial 50 hours" in page 10-8.
REPLACINg HYDRAULIC OIL
FILTER
See "Initial 50 hours" in page 10-10.
10 10
- -
1 1
2010-01-20 오후 3:19:41