Table of Contents
Advertisement
6
Repair Guide
Required Torque Values for Fasteners
Required tools and torque values for fasteners are listed below:
Item
– Fit mother board to chassis
– Fit front frame to chassis
– Fit cover to rear panel
– Fit fan guard to fan assembly
– Fit front panel board assembly to chassis
– Fit bumper foot to cover
– Fit power supply to chassis
– Fit calibrator to bottom chassis
– Fit mother board to chassis
– Fit measurement board to mother board
– Fit PPMC board to mother board
– Fit recorder output to front frame
– Fit trigger in/out to front frame
– Fit channel A/B to front frame
– Fit power reference input cable to calibrator
– Fit power reference input cable to front frame
– The ODU Socket is a special tool, which is orderable using P/N N1912-21012.
NOTE
– This socket is used in conjunction with a 1/4" drive torque wrench, calibrated
90
to 6 in Ibs.
Description/Defaul t
T20 Torx screwdriver bit
T10 Torx screwdriver bit
T6 Torx screwdriver bit
T8 Torx screwdriver bit
1/4" socket
ODU socket
5/16" socket
19 mm socket
Range of values
21 in Ibs
9 in Ibs
3 in Ibs
6 in Ibs
6 in Ibs
6 in Ibs
10 in Ibs
18 in Ibs
Keysight N8262A Service Guide
Advertisement
Table of Contents
