Oracle X6-2 Installation Manual page 21

The Boot Menu screen appears. The UEFI/BIOS Boot Mode field displays the current boot
mode.
The options in the boot order list differ depending on the storage drive configuration
Note -
and whether you have enabled the Persistent Boot Support feature. For more information about
Persistent Boot Support, refer to the Oracle X6 Series Servers Administration Guide at
www.oracle.com/goto/x86admindiag/docs.
4.
Use the down arrow key to select the UEFI/BIOS Boot Mode field, and then press
Enter.
5. Select your preferred boot mode, and then press Enter.
You must select the desired boot mode, Legacy BIOS or UEFI, before starting the operating
system installation.
To save your changes and exit the BIOS Setup Utility, press the F10 key.
6.
Preparing to Install the Oracle Solaris Operating Systems
Set the Boot Mode
http://
21