Running Belt Tension And Tracking Adjustment; About; Tools; Specification - Precor Experience 700 line Series Service Manual

Running Belt Tension and Tracking Adjustment

About

This procedure provides instructions to verify and make adjustments to the running belt ten-
sion and tracking alignment. The running belt tension and tracking should be verified anytime
the running belt is replaced or the belt tracking is not centered.

Tools

5/16" Hex Key
l
Note: Proper tensioning of the belt requires the use of two tensioning gauges, Pre-
cor part number PPP000000020007101.

Specification

Ammeraal Beltech brand running belt tension (gauge/-
(2)
percent)
Forbo brand running belt tension (gauge/percent)
Notes:
1. Referenced to gauge reading 3.0 (0.0%)
2. The Ammeraal Beltech brand running belt must NOT be used with a prewaxed deck.
3. The Forbo brand running belt must be used with a prewaxed deck.
(QTY 2) Belt tension gauges
l
(Precor pn PPP000000020007101)
System Component
Running Belt Tension and Tracking Adjustment
[[[Undefined variable Spe-
cifications.TRM14-Amer-
aalRunBeltTension]]]
(3)
3.55 (0.55%)
4 Adjustment Procedures
Specification
(1)
(1)
Page 43