Precor Experience 700 line Series Service Manual page 206

Monthly Task
floor underneath the tread-
1
mill .
Clean and lubricate the lift
motor jackscrew (Inline
models only).
Inspect visible welds,
frame, and wire con-
1
nections .
Perform the Operation
Verification tests to verify
machine features and oper-
ation.
Quarterly Maintenance
Perform the following maintenance tasks every 3 months:
Quarterly Task
Verify the running belt tension,
alignment, and tracking.
Verify the Drive Motor belt tension. Verify the Drive Motor belt tension and adjust as neces-
Vacuum the front compartment
and Motor Controller fan.
Check the console metric and
indicator display and numeric
keypad functionality.
Record the current Odometer and
Hours.
Note: 1). Perform task with power removed and incline set to maximum level.
2) Diagnostic Test will vary depending on console model.
area under the front cover. Be careful not to bring the nozzle
to close to any electronic circuit boards.
Clean and lubricate the lift motor jackscrew with an
approved grease, see"" on
Do a visual check of welds and frame. Check for loose wire
connections.
Do the Operation verification procedure and return to ser-
vice, see "Operation Verification" on
Verify the running belt tension, alignment and tracking,
see "Running Belt Adjustment" procedure.
sary, see "Drive Motor Belt Tension Adjustment" pro-
cedure.
Remove hood and vacuum the compartment and Motor
Controller fan. It is recommended that you use a static
resistant vacuum cleaner. Be careful to not put nozzle
near PCA electronics.
Run the Display\Keypad diagnostic tests and check the
console metric/indicator LED/LCD displays and numeric
keypad functionality. On P82 series touch-screen con-
soles, run the Touchscreen/Backlight/RGB/Numeric
Backlight/Numeric Display diagnostic tests, refer to
"Hardware Validation Service Menu (51765761)" on
page 23.
Access the Information Display or Equipment Usage
data and record the Odometer and Hours metrics, see,
"Information Display (65)" on page 35
7 Preventative Maintenance
Maintenance Schedule
Instruction
page 3.
page 16.
Instruction
Page 198