Technical Data; Transport And Commissioning; Delivery; Unloading The Machine From The Transport Crate - Leister SEAMTEK W-AT Series Manual

3. Technical Data

Nominal voltage
Frequency
Nominal current
Nominal voltage
Max. welding current
Max. temperature
Drive speed
Electronics
Max. wheel clamping force
Weld seam width
Emission level
Dimensions of machine (L × W × H)
Dimensions of packaging (L × W × H)
Weight of machine
Weight of packaging
Conformity marking
Protection class I
Subject to change without prior notice.

4. Transport and Commissioning

4.1 Delivery

Do not use a crane or other similar equipment to lift the machine.
The SEAMTEK W-AT is delivered packaged and well-protected in a transport crate. When moving the
machine in the transport crate, pay attention to the symbols for the center of gravity.

4.2 Unloading the Machine from the Transport Crate

Danger: At least two people are needed to safely remove the machine from the wooden crate.
Make sure that the machine does not topple over.
Turn the feet (6) upward until the stop to ensure maximum floor clearance.
To ensure that the machine is unloaded from the transport crate safely, we recommend that you proceed as follows or
ask your sales partner.
1. Remove the right side cover of the wooden crate. This cover can also be used as a ramp.
2. Position the right side cover as a ramp in front of the wooden crate and secure the ramp.
3. Then detach all wooden transport securing devices.
4. Turn all four feet (8) upward as far as possible.
5. Using the moving wheel, turn the machine outwards.
6. Slowly move the machine out of the wooden crate. Make sure that the machine does not topple over.

4.3 Transportation on the Company's Premises

Danger: Allow the machine to sufficiently cool down prior to being transported.
SEAMTEK W-900 AT
V~
Hz
A
W
A
°C
m/min
N
mm
LpA (dB)
mm 1500 × 702 × 1500
mm 1760 × 926 × 1536
kg approx. 238 kg (basic version)
approx. 268 kg (fully equipped) approx. 403 kg (basic version)
kg 145
SEAMTEK W-2000 AT
230/240 (US)
50/60 (US)
17
3,900
≈ 600
≈ 680
0 – 30
PC panel with PLC
238
8 – 64
≈ 78
2650 × 702 × 1500
2936 × 926 × 1536
243
7