Table of Contents
Advertisement
13. Accessories
Find out about the extensive range of accessories available at www.leister.com.
Use only original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will be invalidated.
You can find more information at www.leister.com.
14. Add-ons
There is a wide range of accessories and add-ons available. Contact your Leister sales partner or take a look at www.
leister.com.
15. Service and Repair
Repairs must only be carried out by authorized Leister service centers.
Leister service centers guarantee a professional and reliable repair service with original spare parts in accordance with
circuit diagrams and spare parts lists. You will find the address of your authorized service center on the last page of
these operating instructions. You can find more information at www.leister.com.
16. Training
Leister Technologies AG and its authorized service centers offer welding courses and training sessions.
You can find more information at www.leister.com.
17. Warranty
• The guarantee or warranty rights granted for this device by the direct distribution partner/salesperson apply from
the date of purchase.
• In the event of a guarantee or warranty claim (verification by invoice or delivery note), manufacturing or process-
ing errors will be rectified by the sales partner through replacement delivery or repair.
• Other guarantee or warranty claims are excluded within the framework of mandatory law.
• Damage resulting from natural wear, overload, or improper handling is excluded from the warranty.
• Wearing parts and wedges are excluded from warranty obligations or guarantees.
• Guarantee or warranty claims cannot be asserted for devices that have been converted or changed by the pur-
chaser or for which non-original Leister spare parts have been used.
18. Disposal
Electrical equipment, accessories, and packaging should be recycled in an environmentally friendly
way. When you are disposing of our products, please observe the national and local regulations. For EU
countries: Do not dispose of electrical equipment with household refuse.
19. Quick Reference Guide
19.1
Switching on/Starting
1. Switch the machine on via the main switch (10).
2. Select the language and press Start.
3. Select the "Wedge" tab to adjust the wedge.
4. Set the minimum speed, maximum speed, and energy value.
5. In the "Periphery" area, set the wedge and the clamp force to "Auto".
6. Use the left-hand pedal (7A) of the pedal unit (7) to position the material.
7. Start the welding process by pressing the right-hand pedal (7B) of the pedal unit (7) once.
8. Use the right-hand pedal to adjust the speed based on the speed values you have selected.
9. Press the left-hand pedal (7A) once to stop the welding process. Press the pedal (7A) again to lift the wheels.
19.2
Switching off
1. Switch off the heating with the Heating On/Off button.
2. Switch off the main switch (10).
3. Pull out mains voltage plug
46
Advertisement
Table of Contents
