Air Outlet For Switch Cabinet Cooling; Touch Panel Operating Unit; Emergency Stop Button - Leister SEAMTEK W-AT Series Manual

7.2 Air Outlet for Switch Cabinet Cooling

The switch cabinet has an integrated circulation system to cool the machine elements and prevent overheating. The
cooling air is drawn in at point 17 and the warm exhaust air is discharged at point 18. These openings must be kept
clear at all times to avoid obstructing the air circulation.
17
18
Residual air
outlet

7.3 Touch Panel Operating Unit

Caution: Only use your fingers to operate the touch panel. Do not use non-authorized objects such as pens
and tools in order to avoid damaging the touch panel (13).
13

7.4 Emergency Stop Button

Caution: In emergency situations, press the emergency stop button (12) to disconnect the machine from
the current supply.
12
14
Material:
Z
1:2
Fehler: Keine Referenz
Material:
Z
1:2
Fehler: Keine Referenz
The touch panel (13) can be used to see
current operating statuses as well as to
edit all welding parameters. Before operat-
ing the touch panel, carefully read through
Chapter 9 for information on this subject.
Pressing the emergency stop button
(12) shuts down the machine in an instant.