Changing The Welding Wedge - Leister SEAMTEK W-AT Series Manual

Symbol Designation
Wedge Change
Click on this symbol to change the wedge by following the step-by-step instructions. You can then
position the wedge in a subsequent step.
Wedge Adjustment
This menu option provides step-by-step instructions for positioning the wedge.
9.6.3

Changing the Welding Wedge

Work through the instructions by performing each step and clicking on the red arrow to continue.
Switching off the Heating
Switch off the heating (if it is switched on) in order to carry out the next step.
33