6.2 Back View
16
17
21
20. Electrical connection for accessory B
21. Air outlet for switch cabinet cooling
22. Welding wedge
23. Ethernet output for accessory A
24. Electrical connection for accessory A
6.3 Switch Cabinet
The switch cabinet (9) has two separate chambers – an upper and a lower chamber. The chambers must
never be opened while the machine is connected to the power supply.
The switch cabinet and, in particular, the elements inside it can reach very high temperatures. The machine
must therefore always be allowed to cool down sufficiently before opening the switch cabinet in order to
prevent burns.
6.4 Outlets for Accessories
The outlets (20 and 24) on the machine are only approved for use with Leister accessories. The electrical
connection is supplied with mains voltage. The closing caps on the electrical connections (20/24) may only be
removed when using the corresponding original Leister accessories. Leister is not liable for any non-approved
use.
12
24
23
18
19
20
22