To move the machine to the desired location on the respective company's premises, the feet (8) must be turned upward
as far as possible until there is no longer any contact with the floor and the machine rests on the floor with all three
wheels. Make sure that the machine does not topple over.
4.4 Transportation outside of the Company's Premises
To ensure that the machine is well secured, only transport it in the designated transport box.
4.5 Work Environment
Danger: Never use the SEAMTEK W-AT in readily inflammable surroundings and maintain a sufficient
distance from combustible materials at all times.
The SEAMTEK W-AT must only be used in well-ventilated rooms.
• Do not place the SEAMTEK W-AT in the vicinity of sources that cause significant vibrations; for example, other
machines, roads, etc.
• To ensure access around the machine, an unobstructed working area of at least 1 m must be available around the
machine.
• Depending on the function, the wedge holder (3) swings back and forth. Ensure that persons and objects main-
tain an adequate distance.
4.6 Workplace and Workplace Environment
The SEAMTEK W-AT has castors which allow the machine to be moved easily to a different location. Please make sure
that the required space for the machine is maintained, and that the adjustable feet are locked into place whenever the
machine has been moved.
The working area may exceed the marked area.
C
A
Required space for the machine
B
Working area
C
Safety distance
D
Distance to the wall
E
Required space for the service doors
8
D
B
mm
mm
mm
mm
mm
A
SEAMTEK W-900 AT SEAMTEK W-2000 AT
2460 × 1560
3610 × 1560
1420 × 860
2570 × 860
450 × 450
450 × 450
2460 × 260
3610 × 260
710 × 670
710 × 670
E