FITTING
Check and adjust the monitor
then apply the Velcro strips
Connect the monitor, place it tempo-
rarily in the cut-out, and place the
headrest into position.
Check the various monitor settings
such as brightness, headphone func-
tion, volume control and so on.
Then attach the Velcro strips to the
rear of the monitor, and push the fra-
me onto the headrest.
Take care not to press the screen its-
elf, and apply pressure only in the
region of the frame.
20
Example of a direct connection to
a DVD player
DVD - Player (IVDP-01)
Digital
AV
out
in
IVMS 5802/6502
Positive connection
Connect the fuse holder to protect the
positive cable (+12 V). The fuse holder
should be connected to the positive ter-
minal at a distance of max. 30 cm from
the vehicle battery (if necessary, drill a
hole in the bulkhead and use the ap-
propriate cable grommets).
Adapter cable for a
direct connection to an
AV source
Masse
/GND
+12V