General information Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instruc- tions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating in- structions clearer and easier to under- stand.
SUPPLIED PARTS Supplied parts The signal controller is supplied with all the parts listed below. Please check that the range of parts supplied with your device is complete. If one of the listed parts is missing, please contact your dealer immediately. Signal controller 7 607 003 553 Connecting cable Screws...
INSTALLATION be connected to the positive terminal at a distance of max. 30 cm from the vehi- cle battery (if necessary, drill a hole in the bulkhead and use the appropriate cable grommets). Switching positive Connect the switching positive cable (2) (see Fig.
Page 6
Anschlussbilder • Connection diagrams • Schéma électrique • Schemi di allacciamento • Aansluittekeningen • Anslutningsbilder • Esquemas de conexión • Esquemas de ligação • Tilslutningsskemaer Fig. 1 RGB out +12V Ignition Fig. 2 1 2 V RGB OUT DC 12V IN TravelPilot DX...