External Audio/Video Sources; Av Inputs; Video Input; External Monitor - Blaupunkt 640 Series Operating Instructions Manual

External audio/video sources | External monitor | Sound settings

External audio/video sources

AV inputs

This device features two external AV inputs for audio and
video playback:
AV-IN 1 is located under the cover at the front of the
device.
AV-IN 2 is implemented as a cinch socket on a cable
at the rear of the device. You can specify the instal-
lation location of the port during the installation of
the device.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connec-
tor in the front AV-IN socket may cause injuries. The use
of straight plugs or adapters leads to an increased risk
of injury.
u Start the AV-IN mode with the button [ AV-IN 1 ] or
[ AV-IN 2 ].
The display shows the audio or video playback of the
selected AV source.

Video input

This device features a video input at the rear of the device
for connecting a camera that is available as an option. If a
camera is connected, you can display the camera image.
u In the main menu, press the [ Camera ] button.

External monitor

This device features an output for connecting an external
monitor for the rear area of the vehicle (see Connection
diagram at the end of these instructions).
u Select the desired source via the main menu and
start the film playback, e.g. from a DVD.
The film is displayed on the monitor of the device.
u Call up the main menu.
u Press the [
] button.
The film is also displayed on the external monitor.
20

Sound settings

Volume distribution (fader/balance)

You can adjust the volume distribution in the vehicle
for all sources.
u In the main menu or on the control bar of the current
audio source, press the [
The equalizer menu is displayed.
u Press the [
] button.
The menu for fader and balance is displayed.
u Adjust fader and balance with [
[ ] / [ ].
u Next, press [
].
The setting is stored, the current source is displayed
again.

Equalizer

You can adjust the equalizer for all sources.
u In the main menu or on the control bar of the current
audio source, press the [
The equalizer menu is displayed.
u Select a preset equalizer via the buttons.
- Or -
u Press the [ User ] button to adjust the level of the
available frequency bands according to your prefer-
ences.
] button.
] / [ ] or
] button.