Placing The Device In Operation; Turn On/Off The Power; Mute; Adjust The Volume - Blaupunkt CHICAGO 600 Operating And Installation Instruction

Placing the device in operation

Caution!
Transport securing screws
Ensure that the transport securing screws at the
top side of the device are removed before the
startup of the device.

Turn on/off the power

Press and release [
unit on.
Press and hold the [
unit off.
Note:
The unit will power on in the same state it was
in when powered off.

Mute

Press the [ ] button to mute the sound.
Note:
] button again or adjusting
volume will unmute.

Adjust the Volume

Press the [ ] or [
decrease the volume level.
The adjustable range of volume is 0 to 50.

Playing Source Selection

Press the [ ] button on the panel to show
main source menu.
Touch desired icon on the the screen to
enter corresponding working mode, such as
Disc, Navi, Radio, etc.
Drag left/right to scroll.
Note:
cannot be selected.
source you desired has been selected and
wait for some seconds, the unit will auto enter
the playing source mode you have selected.
] button to turn the
] button to turn the
] button to increase or

Main Menu

In the main menu, you press the buttons on the
touch-screen to call up the different sources and
operating modes.
Press the [ ] button to enter main source
menu.
1. Enter setting mode.
2. Function icons
3. Clock
4. Touch to access Equalizer level settings menu.

Setting the reception area

This car sound system is designed for operation in
different regions with different frequency ranges
and station technologies. The factory default
of the reception area is "ASIA (FM/AM)". If you
operate the car sound system outside of Asia, you
may first have to set a suitable reception area in
the menu:
In the main menu, press the [
The Settings menu is displayed.
In the bottom area of the Settings menu,
press the [ General ] button.
The current setting is displayed behind
"Radio region".
Tap twice (double-click) on the [ Radio
region ] button to display the list of available
reception areas.
Select the desired reception area by double-
clicking.The list is hidden, the selected
reception area is set.
Press the [ ] button. The main menu is
displayed again.
Startup
] button.
5