Blaupunkt Chicago IVDM-7002 Installation/Connections

Chicago IVDM-7002
Installation & Connections
Before attempting to connect, or operate this product, please read the manual completely.
NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates dangerous voltage
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates
important instructions
accompanying the product.
CAUTION: THIS UNIT HAS BEEN ADAPTED WITH AN
INVISIBLE CLASS 1 LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
Caution:
This product satisfies FCC regulations when shielded cables and
connectors are used to connect the unit to other equipment. To
prevent electromagnetic interference with electric appliances, such
as radios and televisions, use shielded cables and connectors for
connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different form
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus
meets all requirements of the
Canadian lnterference - Causing
Equipment Regulations.
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO
NOT REMOVE THE
COVER (OR BACK).
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
WARNING
To reduce the risk of fire or shock hazard, do not expose this DVD
player to rain or moisture.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER
AND DO NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
Caution
Install the control unit away from moisture, heat sources, and places
exposed to strong magnetic or electric fields. When condensation
forms inside the player or on the surface of the disc due to sudden
temperature changes from cold to hot, the player may not operate
correctly. If this occurs, leave the player at room temperature for
about 2 hours or until the player becomes operational.
Warning
Never disassemble the main unit in any way. Electric shock or
exposure to an invisible laser beam may result. Do not look inside
the DVD player.
Installation
Install the in-dash unit so that the driver cannot view video while the
vehicle is in motion. The driver should park the vehicle in a safe area
and apply the parking brake before viewing video on the monitor.
Batteries
The batteries used in the remote control contain the chemical that
are harmful to the environment. Properly dispose of batteries.
Handling the Main Unit
For safety reasons,
• Do not use benzene or other solvents when cleaning.
• Wipe the main unit with a soft cloth.