BERNINA
Correction:
There are two different ways to do the adjustment instant of decoupling the old style and the new style:
1. Loosen screw and move clutch up and
2. Clutch lever can be adjusted in height.
NOTE: If lever #131 is too high, either the needle bar
will never decouple, or it will decouple too late. If it
is too low, the needle bar will decouple too early.
1
1
For the use by Authorized BERNINA Dealers Only
OLD STYLE:
down.
2
Exchange of Parts & Adjustments Series 700/800/900
NEW STYLE:
1. Loosen screw very slightly and make
adjustment with the eccentric tool
2. Clutch lever can be adjusted sideways.
NOTE: If lever #131 is too far to the right, either the
needle bar will never decouple, or it will decouple
too late. If it is too far to the left, the needle bar will
decouple too early.
1
Page 34/45
2
Last Revised 5/11/2005
2003 Bernina of America Inc