Bernina 700 Series Advanced Technical Training page 46

BERNINA 
2.5 Take-Up Lever
Removal:
1. Remove top and light cover.
2. Remove light socket, thread catcher, cushioner and spring.
3. Loosen screw in the frame.
4. Loosen the two screws on the collar and
5. Loosen the screw on aluminum support,
6. Remove the collar and shaft.
7. Carefully swing the needle bar support out and downwards.
For the use by Authorized BERNINA Dealers Only
4,6&
22
3&22
Exchange of Parts & Adjustments Series 700/800/900
Code B
5&22
6,22
&26
Page 12/45
7,22
&25
Last Revised 5/11/2005
2003 Bernina of America Inc