BERNINA
2.1 Exchange of Feed Dog Eccentric
1. 930 only, remove the feed dog lifter mechanism by removing the far left hand shaft with C-clip and washer.
2. Remove the C-clip from the pivot point shaft, removed the shaft, three washers.
3. Pull the lifter fork to the left for removal.
4. Turn machine upside down and secure it to the workbench using two wooden blocks.
5. Loosen one or two screws from the shaft
6. Remove the shaft.
7. Remove all base plate and cover screws and remove the base plate.
For the use by Authorized BERNINA Dealers Only
1
2
Exchange of Parts & Adjustments Series 700/800/900
5&
19
3
5&
18
Page 2/45
Code A
5&
18
Last Revised 5/11/2005
2003 Bernina of America Inc