Embroidery Updates (Bernina 830 Only); Start Of Embroidery; Using Zoom Option With Panning; Using Foot #44C (The New Cutwork & Echo Quilting Foot) - Bernina 8 SERIES V29.39.00 Software Update

3 EmBRoIdERy UpdAtES (BERNINA 830 oNly)

3.1 Start of embroidery

If the Start button was pressed while the bobbin door was open, either the embroidery start was
not possible or the start position was incorrect. This has been resolved.

3.2 Using zoom option with panning

When using the zoom option, only the view of the design will be moved. The hoop position rela-
tive to the design will not be changed.
3.3 Using Foot #44C (The new CutWork & Echo quilting foot)
Developed for the CutWork tool, this foot can also be used for quilting.
For designs with "cut" and "normal" embroidery layers, the foot #44C can be selected in the
stitch out mode. The outlines for the selected foot will be immediately set. The position of the
design will not change.
10/14, 04.11.2009