Figure 11.
DXP 1616 Web Page
Device Info — Displays the device name, brief product description, and part number, with the option to edit the device
•
name. The panel also contains an Extron link which opens
Inputs — Displays the name and signal type of the active input signal, and its HDCP encryption status (
•
this information for the rest of the inputs, click the n More link at the bottom of the panel.
Roles and Permissions — Enables you to set and remove administrator and user passwords (
•
button to access these controls.
Device Status —Displays the current date, time, time zone, the amount of time the device has been running (Uptime),
•
and internal temperature in degrees Celsius (
the computer to which it is connected. Click Edit to access editable date and time fields.
Outputs — Displays the resolution and refresh rates of the outputs 1 and 2, their signal type (HDMI or DVI), and their
•
). To display information for the rest of the outputs, click the n More link at the bottom of the panel.
HDCP status (
5
Network Settings — Enables you can set the IP address, subnet mask, and gateway address for your DXP, and turn
•
DHCP on and off. You can also view the MAC address of the unit (
click the Edit button to access editable fields.
Firmware — Displays the current firmware version and the date it was last updated (
•
firmware on your DXP from this panel (firmware files can be downloaded from www.extron.com) .
© 2020 Extron Electronics — All rights re
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
www.extron.com
4
). Click Sync to PC to set the date and time on the DXP to match that of
6
). To edit these settings (except the MAC address),
served.
www.extron.com
in a new window (see figure 11,
2
). To display
3
). Click the Edit
7
). You can also update the
1
).
68-2939-52 Rev. A
04 20