Control Unit Installation - Enwork PROXI Installation Manual

2 ) A S S E M B L Y :
F I G U R E 7
Mount the Control Unit Bracket.
F I G U R E 9
Connect the Cables to the Control Unit.
F I G U R E 1 1
Mount the Remote Control to the Table top.
I N S T A L L A T I O N
C O N T .
G U I D E
F I G U R E 8
Mount the Control Unit.
F I G U R E 1 0
Connect the Connection Cable to the Leg.
Do not put power to the system before it is fully assembled.
F I G U R E 1 2
Connect the Remote Control Cable to the Control Unit.