Operation; Indicator/Operating Elements And Ports Of The Control Electronics; Menu Tree For Setup And Parameters - Bosch Rexroth VT-VPCD Series Operating Instructions Manual

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk

9 Operation

9.1 Indicator/operating elements and ports of the control
electronics
The operating elements and ports on the front panel of the control electronics
VT-VPCD can be used to query settings and parameters, connect external test
instruments or connect the control electronics to a PC. For a detailed description
of indicator and operating elements, see Chapter 5.2.3 "Display and operating
elements and test sockets" on page 23.

9.1.1 Menu tree for setup and parameters

The display is used for indicating command values and actual values as well as
errors. For making any settings or parameter changes, BODAC has to be used.
The following overviews are given on the next few pages:
Menu tree "Parameters"
Menu tree "Setup"
Menu tree "Analog I/O" part 1
Menu tree "Analog I/O" part 2
Menu tree "Analog I/O" part 3
Menu tree "Faults"
Menu tree "Test jacks"
By pressing the key combination "Enter" and "ESC" you get to a menu with several
entries at Level 1: "Setup", "Analog I/O", "Faults" and "Test jacks". Hold the keys
depressed for about 5 seconds.
www.hyquip.co.uk/web/index
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
Operation 39/60