Operating The Control Electronics Vt-Vpcd - Bosch Rexroth VT-VPCD Series Operating Instructions Manual

46/60 Operation
Bosch Rexroth AG, VT-VPCD, RE 30028-B/09.13
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
Level 1 Level 2
Test Jacks
X1
X2
Fig. 27: Menu tree "Test jacks"

9.2 Operating the control electronics VT-VPCD

To make operations directly on the control electronics you can use the four control
keys "UP", "DOWN", "ENT" and "ESC".
With the help of these control keys you can quickly and easily check, modify or
optimize parameters and settings on the control electronics.
(Initial) commissioning must always be carried out using the BODAC software.
+44 (0)1204 699 959
enquiries@hyquip.co.uk
www.hyquip.co.uk/web/index
Level 3 Level 4
Signal
Off
Act. Pressure B
Act. Pressure A
Act. Valve
Res. Angle CMD
Act. Angle
Power CMD
Valve CMD
Act. Power
Angle CMD
Pressure CMD
Units => 100 %
[0~600]
Signal
Off
Act. Pressure B
Act. Pressure A
Act. Valve
Res. Angle CMD
Act. Angle
Power CMD
Valve CMD
Act. Power
Angle CMD
Pressure CMD
Units => 100 %
[0~600]
Level 5