Table of Contents
Advertisement
HD Mesh Node
Section 6 Default Configuration
The HD Mesh node is configured with the first 5 ports as router ports, each with their own IP address.
The ports are also configured to give out DHCP IP addresses. Ports 6, 7, and 8 are configured to act as a
single bridge. The bridge is configured with an IP Address and also as a DHCP server. The wireless card is
configured with its own IP address and also as a DHCP Server. Port 9 is configured as a DHCP client. (Figure
41)
Port
Ether 1
Ether 2
Ether 3
Ether 4
Ether 5
Ether 6
Ether 7
Ether 8
Ether 9
WLAN 1
Bridge 1
Trango Broadband Wireless — High Density MESH
IP address
Bridge
192.168.1.1/24
No
192.168.2.1/24
No
192.168.3.1/24
No
192.168.4.1/24
No
192.168.5.1/24
No
N/A
Yes
N/A
Yes
N/A
Yes
No
192.168.1.10/24
No
192.168.7.1/24
Comments
DHCP Server issues IP addresses from
DHCP range 192.168.1.50-100
DHCP Server issues IP addresses from
DHCP range 192.168.2.50-100
DHCP Server issues IP addresses from
DHCP range 192.168.3.50-100
DHCP Server issues IP addresses from
DHCP range 192.168.4.50-100
DHCP Server issues IP addresses from
DHCP range 192.168.5.50-100
Bridge port 1
Bridge port 1
Bridge port 1
DHCP Client- NAT
802.11b/g SSID: HDMESH
DHCP Server issues IP addresses from
DHCP range 192.168.7.50-100
Figure 41
page 33
Advertisement
Table of Contents
Need help?
Do you have a question about the High Density Mesh System and is the answer not in the manual?
Questions and answers