Advertisement
S P E C I F I C A T I O N S
CONTROL / CONNECTIONS
5pin XLR Input
5pin XLR Thru Output
(6) 5pin XLR Outputs
Locking Power Connector In
SIZE / WEIGHT
Length: 6.8" (173mm)
Width: 6.7" (170mm)
Vertical Height: 2.9" (74mm) (with mounting bracket)
Weight: 2.1 lbs. (1.0kg)
ELECTRICAL / THERMAL
AC 100-240V - 50/60Hz
230W Max Power Consumption
14°F to 113°F (-10°C to 45°C)
APPROVALS / RATINGS
CE
Specifications and improvements in the design of this unit and this manual are subject to change without notice.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This device uses and can radiate
radio frequency energy and, if not installed and used in accordance with the included instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be determined by
turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following
methods:
•
Reorient or relocate the device.
•
Increase the separation between the device and the receiver.
•
Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn off all electrical products when they are not
in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!
8
Advertisement
