Download Print this page

Safety Guidelines - Elation RDMX6S User Manual

Advertisement

S A F E T Y G U I D E L I N E S
This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is
important to follow all instructions and guidelines in this manual. Elation Professional is not
responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard
of the information printed in this manual. Only qualified and/or certified personnel should perform
installation of this fixture and only the original rigging and mounting hardware included with this
fixture or available optional accessories should be used for installation. Any modifications to the
fixture and/or the included and optional rigging and mounting hardware will void the original
manufactures warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID
YOUR MANUFACTURES WARRANTY. DAMAGES RESULTING FROM
MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF
SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID
THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY
WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS DEVICE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING DEVICE!
KEEP FLAMMABLE MATERIALS AWAY FROM DEVICE!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICE TO RAIN AND/OR MOISTURE!
DO NOT shake device, avoid brute force when installing and/or operating device.
DO NOT operate device if the power cord is frayed, crimped, damaged and/or if any of the power
cord connectors are damaged and do not insert into the device securely with ease.
NEVER force a power cord connector into the device. If the power cord or any of its connectors are
damaged, replace it immediately with a new one of similar power rating.
ALWAYS disconnect device from power before performing any service and/or cleaning procedure.
ONLY handle power cord by the plug end, never pull plug out by tugging the wire portion of the cord.
ONLY use the original packaging and materials to transport the fixture in for service.
6

Advertisement

loading