Traffi C Information; Dab-Fm Traffi C Information Source; Switching Traffi C Information Priority On/Off; Setting The Volume For Traffi C Announcements - Blaupunkt NASHVILLE DAB47 Operating Instructions Manual

Traffi c information
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network.
Whenever a traffi c announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffi c reports to the appropriate traffi c in-
formation station within the broadcasting
network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
DAB-FM traffi c information
source
If traffi c information priority is activated,
the device automatically switches to an in-
coming traffi c announcement being broad-
cast via DAB within a DAB broadcasting
network (in DAB mode) or via FM (in radio
mode, see RDS-EON). In AUX, SD/MMC,
CD/MP3 and CD-changer mode, you will
hear traffi c announcements played from
the source that was active last (either DAB
or radio).
Switching traffi c information
priority on/off
u Press the TRAF button 8.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol.
Notes:
You will hear a warning beep:
• If you leave the reception area of a
traffi c information station that you
are currently listening to.
82
• If, while listening to a CD/MP3, SD/
MMC or a CD in the changer, you leave
the reception area of a traffi c informa-
tion station that the system is tuned
into and the subsequent automatic
search cannot fi nd a new traffi c infor-
mation station.
• If you retune the radio from a traffi c
information station to a station that
does not broadcast traffi c informa-
tion.
If you hear the warning beep, you can ei-
ther switch off traffi c information priority
or tune into a station that broadcasts traffi c
information.
Setting the volume for traffi c
announcements
u Press the MENU•OK button 7.
u
Press the or
until "VOLUME MENU" appears on the
display.
Press the MENU•OK button 7 to dis-
u
play the volume menu.
u
Press the or
edly until "TRAFFIC" appears on the
display.
u
Adjust the volume using the
tons 6.
u Press the MENU•OK button 7 and
then the DIS•ESC button 5 to exit the
menu.
Notes:
Using the volume control 3, you can
•
also adjust the volume during a traf-
fi c announcement for the duration of
that announcement.
button 6 repeatedly
button 6 repeat-
but-