Meter Setting - Alpha ESS Storion-SMILE T10 Installation Manual

INSTALLATION

2.4.3 Meter Setting

2.4.3.1 ADL3000
Step 1 The initial interface of the meter
(normal working interface) is as shown
below:
Step 3 Click the "Enter" button to enter
the following interface and press the up
and down arrow keys to enter the
password 0001;
Step 5 Click the "Enter" button again to
enter the address interface:
Step 7 Click the "Enter" button and the
address setting is completed.
Step 2 Click the "SET" button to enter the
password interface:
Step 4 Click the "Enter" button and the
password input is completed.
Step 6 Click the "Enter" button to enter
the following interface, press the up and
down arrow keys to set the meter address,
the Grid meter (DC, AC and Hybrid system)
address is set to 001, and the PV meter (AC
and Hybrid system) address is set to 002.
Step 8 Click the "SET" button to enter the
following interface:
29 30
Step 9 Click the "SET" button again to
enter the save interface:
Step 11 Click the "Enter" button and the
setting ends.
2.4.3.2 ACR10R
Step 1 This is the initial interface of the
meter, click the "Set" button;
Step 3 On the password input interface,
the code is "0001", confirm to enter the
setting interface;
INSTALLATION
Step 10 Click the "Enter" button to enter
the following interface, press the up and
down arrow keys, and set "no" to "YES" to
save the configuration.
Step 2 Click the "SETUP" button;
Step 4 In the setting interface, select
"Comm" option, enter the communication
setting interface;