Table of Contents
Advertisement
Item
Description
A
Bolt
B
Spring washer
C
Flat washer
D
OT terminal
E
Grounding
Logger3000
6.6 Power Supply Connection
The Logger3000 supports DC24V DC input or AC110-240V (50/60HZ) AC input.
This section will take the AC power supply for example.
Prepare the power cable and the terminals.
Step 1
Cable
AC power supply
DC power supply
Insert the power supply terminal to the corresponding DC or AC power
Step 2
supply port.
UPS
The Logger3000 can connect to the DC and AC power at the same
time, where the DC power can connect to the UPS as the backup
power supply.
E
hole
of
the
Cable recommended
Cross-sectional area 1mm
Cross-sectional area 1mm
19
Note
M4
-
-
-
-
2
2
~1.5mm
2
2
~1.5mm
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Logger 3000 and is the answer not in the manual?