HighSecLabs SX22D-3 User Manual page 18

SEC TIONS
Table of Contents
INSTAllATIoN
Installation
Step 1 – Connecting the Console devices to the product
Product requires connection of all devices and computers prior to powering it
up.
Note: some devices such as user display would not be recognized if
connected after product is already powered up.
See figures above for connector locations.
• Connect user display/s. Mark which display is coupled with which computer.
It is also recommended to mark which computer is coupled with which
channel.
Notes:
1. It is recommended that both connected displays will be the same size and
model. EDID information is taken from the display connected to console
video port 1 and sent to all connected computers.
2. If user display is only VGA, Verify that all computers are having either VGA
or DVI-I display output.Use DVI to VGA compatible cable.
• Connect user keyboard and mouse to console keyboard and mouse ports.
HSL 2-Port Secure KVM Mini-Matrix
1 2
Notes:
1. Console USb keyboard and mouse ports are switchable, i.e. you can
2. for security reasons products do not support wireless keyboards. In any
3. Non-standard keyboards, such as keyboards with integrated USb hubs and
4. Console USb mouse port supports Standard KVM Extender composite
• Connect headphones/speakers to console audio out port (optional) In
any case do not connect a microphone to the product audio output port
including headsets..
3 4
connect keyboard to mouse port and vice versa. However, for optimal
operation it is recommended to connect USb keyboard to console USb
keyboard port and USb mouse to console USb mouse port.
case do not connect wireless keyboard to product.
other USb-integrated devices, may not be fully supported due to security
policy. If they are supported, only classical keyboard (HID) operation will be
functional. It is recommended to use standard USb keyboards.
device having a keyboard/mouse functions.
5 6
17