Connect The Antenna(S) - Sierra Wireless AirPrime MC Series Quick Start Manual

AirPrime MC Series Dev Kit Quick Start Guide
16

Connect the antenna(s)

After installing the Mini Card, connect the supplied antenna(s) to the Dev Kit
(some Mini Cards include both a main and an auxiliary (diversity/GPS) antenna):
1. Place the Dev Kit face-up. The antenna connectors are on the right side near
the top.
2. Screw the silver adapter onto the Dev Kit's main antenna connector.
Figure 2-8: Connecting the antenna adapter
3. Connect the Mini Card's main antenna to the Dev Kit's main antenna
connector using the gray wire provided—press down lightly on the connector
ends. (The first few times you use these connectors, they may be quite
snug—press straight down on the end to get a secure connection.)
Figure 2-9: Connecting the antenna wire
4. Connect the antenna to the adapter. (The first few times you attach the
antenna, it may be quite snug.)
Figure 2-10: Connecting the antenna
5. If your Mini Card supports a second antenna (diversity or GPS), repeat
Step 2–Step 4 for the second antenna.
Proprietary and Confidential 2130705