Setup And Installation; Hardware Setup; Insert A Sim Card (Umts/Lte Mini Cards Only) - Sierra Wireless AirPrime MC Series Quick Start Manual

2: Setup and Installation

Note: Throughout this
document, 'SIM' refers to
'SIM' and 'USIM'.
Rev 2 Jun.14
To begin using the Dev Kit with your development system, set up your
hardware and software:
•

Hardware setup

·

Insert a SIM card (UMTS/LTE Mini Cards only)

· Insert the Mini Card
· Connect the antenna(s)
· Connect the power supply and USB cable
· Connect the Dev Kit and host device using a Mini Card Host
Extender on page 17
• Software setup (CDMA)
· Install / update Mini Card drivers and Watcher
Hardware setup
Insert a SIM card (UMTS/LTE Mini Cards
only)
To use a UMTS/LTE Mini Card (MC7xxx/8xxx), you need to install:
• A live SIM card (with an active account), or
• A test SIM card for use with a call box (for example, an Agilent
8960 or Rohde&Schwarz CMU200)
To install the SIM card:
1. Place the Dev Kit face-up (as shown)—the SIM slot is on the left
side beside the USB plug and the black banana plug.
Figure 2-1: SIM slot location
Proprietary and Confidential
on page 15
on page 16
on page 17
on page 22
2
on page 13
13