Siemens SIMATIC ET 200SP Manual page 34

Technical specifications
Article number
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm
•
Diagnostic messages
Monitoring the supply voltage
•
Wire-break
•
Short-circuit
•
Group error
•
Diagnostics indication LED
Monitoring of the supply voltage
•
(PWR-LED)
Channel status display
•
for channel diagnostics
•
for module diagnostics
•
Potential separation
Potential separation channels
between the channels
•
between the channels and backplane bus
•
between the channels and the power sup-
•
ply of the electronics
Isolation
Isolation tested with
Dimensions
Width
Height
Depth
Weights
Weight, approx.
34
6ES7137-6BD00-0BA0
Yes; The port diagnosis is available in the IO-Link
mode only.
Yes
Yes
Yes
Yes
Yes; green PWR LED
Yes; one green LED for channel status Qn
(SIO mode) and port status Cn (IO-Link mode)
per channel
Yes; red Fn LED
Yes; green/red DIAG LED
No
Yes
No
707 V DC (type test)
15 mm
73 mm
58 mm
30 g
Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)
Manual, 10/2017, A5E03856846-AD