Tone/Pulse Dialling - Toshiba Strata DKT3010F-S User Manual

Advanced Operation
The numbers are defined in
Table 4 Dial String Characters
Entry
0~9
0~9
#
End of Speed Dial Number when entering via access code (
Escape. "
following represents something exceptional. When
*
consumes one Speed Dial digit. Entering
use two of 32 characters.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
pause escape sequences. For example, to insert a 17-second pause, enter
*
(1 ~ 9)
display of a pause in the Speed Dial Number shows a "P" without specifying the
duration. In this example, you would see "PP."
** *
*
# #

Tone/Pulse Dialling

With some older Exchangess, you may have to make calls on outside lines programmed for rotary dial
pulses. This feature enables you, while on these lines, to switch to tone dial to access remote
equipment (such as an answering machine) requiring touchtones.
With ISDN calls, when
Note
point will be sent with touchtones.
To change Tone Dialling
1. Access an outside line.
2. Dial a telephone number.
3. While on the call, press
pulses, access the outside line and dial the telephone number like any other call described in this user
guide.
The Tone LED lights steady red and you are able to send touchtones with your dial pad. The feature is
cancelled when the call is completed.
Strata CTX DKT3000/2000-Series Digital Telephone October 2002
Table 4:
*
" functions as an escape key indicating that the number immediately
Tone Dial Select
Tone Dial Select
Meaning
#66)
*
is used as an escape character, it
*
7
to insert a seven-second pause would
is pressed, all of the digits entered after that
. Although the outside line is programmed for rotary dial
Tone/Pulse Dialling
*9*8
. The
53