Reset Factory Default Settings; Handset Volume - Toshiba IP5000 User Manual

Reset Factory Default Settings

To reset the LCD settings to Factory defaults
3
1. Press +
2. Press Volume
3. Press
FB01 – Resets Terminal Data (This includes Handset Volume and Handset/
Headset sidetone.)
FB02 – Resets LCD Contrast / Backlight data
FB03 – Resets Network data.
FB04 – Resets Analogue exchange settings (on IP5122-SDC only).
4. Press FBxx to turn on initialisation FB will light red.
5. When FB's have been selected, press
6. Lift the handset off-hook /on-hook to perform initialisations. Telephone will reset.

Handset Volume

3
1. Press +
2. Press
3. Press
FB01 – Sets Handset Transmit (Tx) volume
FB02 – Sets Handset Receive (Rx)
4. Press FBxx and enter a value from -8dB to +6dB. Default value is 0. (Tx/Rx)
To enter a negative number, use the * key in place of the "-" sign.
Note
5. Press
6. Lift the handset off-hook /on-hook to save settings.
Strata CIX IP5000-series Telephone UG
6 9
+ + (simultaneously).
to access Initialising Mode.
6 9
+ + (simultaneously).
button.
to access Sound Level Setting Mode.
to save settings.
10/08
Administrator Programming
Reset Factory Default Settings
to save the settings.
111