Remote Control; Smartgrid - Miele WWG 660 Operating Instructions Manual

Remote control

The
Remote control
depending on country) is only visible if
the Miele@home
activated.
Once the Miele@mobile App has been
installed on your mobile device, you
can check the status of your washing
machine from anywhere and start it
remotely. You can also control it
remotely via the MobileStart
programme.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If is not switched on, the
Remote control
App can cause the programme to be
cancelled.
Use the Delay start function to set a
timeframe within which you want the
washing machine to start (see "Delay
start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.
setting (available
setting is set up and
Remote control

SmartGrid

The setting (available
SmartGrid
depending on country) is only visible if
the Miele@home
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier's
energy costs are most economical.
Activating
SmartGrid
start sensor a new function. Use the
Delay start sensor to set the
The washing machine will then start
within the timeframe specified by you
when it receives a signal from your
energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the washing machine will start
automatically (see "Delay start").
SmartGrid is deactivated as standard.
Settings
setting is set up and
gives the Delay
SmartGrid .
95