Smartgrid; Remote Control - Miele WCR890 WPS Operating Instructions Manual

Settings

SmartGrid

The SmartGrid setting is only visible if
the Miele@home
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier's
energy costs are most economical.
Activating SmartGrid
sensor a new function. Use the "Timer"
sensor to set SmartStart. The washing
machine will then start within the time-
frame specified by you when it receives
a signal from your energy supplier.
If a signal has not been received from
the energy supplier by the latest start
time set, the washing machine will start
automatically (see "Delay start").
SmartGrid is deactivated as standard.
110
setting is set up and
gives the Timer

Remote control

The Remote control
ible if the Miele@home
and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your washing
machine from anywhere and start it re-
motely. You can also control it re-
motely via the MobileControl pro-
gramme.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If Remote control is not switched on, the
app can cause the programme to be
cancelled.
Use the "Delay start" sensor to set a
timeframe within which you want to
start the washing machine (see "Delay
start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as stand-
ard.
setting is only vis-
setting is set up
Remote control