Remote Control; Smartgrid - Miele WWH860 WCS Operating Instructions Manual

Remote control

The Remote control
visible if the Miele@home
up and activated.
Once the Miele app has been installed
on your mobile device, you can check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileStart programme.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If is not switched on, the
Remote control
app can cause the programme to be
cancelled.
Use the delay start function to set a
timeframe within which you want to
start the washing machine (see "Delay
start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.
setting is only
setting is set
Remote control

SmartGrid

The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
You can set your washing machine to
start automatically based on an
external signal within a certain time
period.
Activating SmartGrid
start sensor control a new function. Use
the delay start control to set the
SmartGrid . The washing machine will
then start within the time period
specified by you when it receives an
external signal. If an external signal has
not been received by the latest start
time set, the washing machine will start
automatically (see the "Delay start"
chapter).
SmartGrid is deactivated as standard.
Settings
gives the Delay
105