Networking; Remote Control; Smartgrid - Miele WWK 360 Operating Instructions Manual

Networking

The ,  and  programmable
functions are only displayed if the re-
quirements for using Miele@home
have been met (see the "Before using
for the first time" chapter,
"Miele@home" section).
 Remote control
You can use the Miele app to check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileStart programme.
You can switch off the  program-
mable function if you do not want to op-
erate the washing machine with your
mobile device.
If the  programmable function is not
switched on, the app can still be used to
cancel a programme.
Use the  sensor control to set a time
period within which you want to start
the washing machine and start the
delay start function (see the "Delay
start/SmartStart" chapter). The wash-
ing machine will then start within the
time period specified when it receives
your signal. If it has not received a start
signal by the latest start time set, the
washing machine will start automatic-
ally.
Options
 = remote control function is
switched off
= remote control function is

switched on (factory default)
Programmable functions
 SmartGrid
You can set your washing machine to
start automatically based on an ex-
ternal signal within a certain time
period.
If you have activated SmartGrid, the
 sensor control will have the new
"SmartStart" function rather than the
"Delay start" function.
Use the  sensor control to set a
SmartStart time period. The washing
machine will then start within the time
period specified by you when it receives
an external signal. If an external signal
has not been received by the latest start
time set, the washing machine will start
automatically (see the "Delay start"
chapter).
Options
 = SmartGrid is switched off
(factory default)
= SmartGrid is switched on

83