Before using for the first time
Settings for compartment
The UltraPhase 2 values are preset in
the standard settings.
After the UltraPhase 1 cartridge has
been pushed in, the display message
switches to:
Agent for
Confirm with the OK sensor.
Miele UltraPhase 2
Confirm with the OK sensor.
The dispensing quantity for
UltraPhase 2 for (hardness range I)
is preset.
Per load
Confirm the preset value with the
OK sensor. If you want to change this
value, use the sensors and
confirm with the OK sensor.
UltraPhase 2
Hardness level I
Hardness level II
Hardness level III
The following appears in the display:
Insert
22
OK
OK
36
ml
OK
36 ml
45 ml
54 ml
Remove the foil from the detergent
cartridge.
Push the UltraPhase 2 detergent
cartridge into compartment 2 until it
locks into position.
When the cartridge is pushed in, the
display message switches to:
"TwinDos" is set. Can be changed in
'Settings'
Confirm with the OK sensor.
Close the TwinDos access panel.