Networking; Remote Control; Smartgrid - Miele WWD 660 WCS Operating And Installation Instructions

Programmable functions

Networking

The , , and  programmable
functions are only displayed if the re-
quirements for using Miele@home
have been met (see "Before using for
the first time – Miele@home").
 Remote control
You can use the Miele app to check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileStart program.
You can switch off the  program-
mable function if you do not want to
operate the washing machine with your
mobile device.
If the  programmable function is not
switched on, the app can still be used
to cancel a program.
Use the  sensor button to set a time
period within which you want to start
the washing machine and start the De-
lay Start function (see "Delay Start/
SmartStart"). The washing machine will
then start within the time period speci-
fied when it receives your signal. If it
has not received a start signal by the
latest start time set, the washing ma-
chine will start automatically.
Options
 = Remote-control function is
switched off
 = Remote-control function is
switched on (factory default)
86
 SmartGrid
You can set your washing machine to
start automatically based on an exter-
nal signal within a certain time period.
If you have activated SmartGrid, the
 sensor button will have the new
"SmartStart" function rather than the
"Delay Start" function.
Use the  sensor button to set a
SmartStart time period. The washing
machine will then start within the time
period specified by you when it receives
an external signal. If an external signal
has not been received by the latest start
time set, the washing machine will start
automatically (see "Delay Start").
Options
 = SmartGrid is switched off (fac-
tory default)
 = SmartGrid is switched on