Tone/Pulse Dialing; Two (Tandem) Co Line Connection; [Dn] Button - Toshiba DK User Manual

Features

Tone/Pulse Dialing

Tone/Pulse Dialing
With some older Central Offices, you may have to make calls on CO lines that are
programmed for rotary dial pulses. This feature enables you, while on these lines, to
switch to tone dial in order to access remote equipment (such as an answering
machine) requiring DTMF tones.
With ISDN calls, when
that point will be sent with DTMF tones.
➤
To change Tone Dialing
1. Access a CO line.
2. Dial a telephone
number.
3. While on the call,
press

Two (Tandem) CO Line Connection

[DN] Button

This feature enables a station user to connect two CO lines, then drop out of the
conversation.
➤
To connect two outside lines (using a [DN] button)
1. While talking on an
outside call using a
[DN] button, press
80
Although the CO line is programmed for rotary dial
pulses, access the CO line and dial the telephone
number like any other call described in this user guide.
The Tone LED lights steady red and you are able to
send DTMF tones with your dial pad. The feature is
. cancelled when the call is completed.
You hear dial tone. The [DN]
LED flashes (conference
rate).
.
is pressed, all of the digits entered after
Strata DK Digital Telephone 10/01