Call Forward-External - Toshiba DK User Manual

Features
Call Forward
Call Forward—External
1. Store the destination
number at Station
Speed Dial location
Code 49 (RCTUA, B,
C/D processors) or
location 139
(RCTUE/F
processors).
Only perform Step 1
the first time Call
Forward-External is
set or when you
change the
destination. It is not
necessary to store the
destination each time;
it remains in system
memory.
2. To set CF-External,
press
...or the [PDN] +
➤
To cancel a Call Forward–External
➤
Press
...or [PDN] +
34
This feature enables you to forward new incoming
calls directed to your [PDN] to a destination outside of
the system. [PhDNs] assigned to your telephone do not
Call Forward to an external destination. Internal calls
and transferred calls to your [PDN] do not forward to
external destinations.
Only incoming calls over CO lines dedicated to
immediately ring on your [PDN], private CO
button, and/or Direct In Dial line calls forward. Any of
the other Call Forward modes can be set for your
[PDNs] or [PhDNs] simultaneously with Call
Forward-External.
Use the Speed Dial storage procedures detailed on
Page
include the CO Line (or CO Line group) access code
before the telephone number.
Example: 8015833700
801 = CO Line access code
5833700 = Telephone number
See
access codes. The LCR access code "9" cannot be
used.
Incoming calls forward to the destination stored at
Station Speed Dial Location 49.
.
+
70. When forwarding to an outside destination
Table 13 on Page 134
.
for CO Line/Line Group
Strata DK Digital Telephone 10/01